- Industrie: Telecommunications
- Number of terms: 29235
- Number of blossaries: 0
- Company Profile:
ATIS is the leading technical planning and standards development organization committed to the rapid development of global, market-driven standards for the information, entertainment and communications industry.
1. In a hybrid set, hybrid coil, or resistance hybrid, a circuit used to match, i. E. , to balance, the impedance of a uniform transmission line, i. E. , twisted metallic pair, over a selected range of frequencies. Note: A balancing network is required to ensure isolation between the two ports of the four-wire side of the hybrid. 2. A device used between a balanced device or line and an unbalanced device or line for the purpose of transforming from balanced to unbalanced or from unbalanced to balanced.
Industry:Telecommunications
1. In a public switched telecommunications network, the ultimate user, i. E. , customer, of a communications service. Note 1: Subscribers include individuals, activities, organizations, etc. Note 2: Subscribers use end instruments, such as telephones, modems, facsimile machines, computers, and remote terminals, that are connected to a central office. Note 3: Subscribers are usually subject to tariff. Note 4: Subscribers do not include communications systems operating personnel except for their personal terminals. 2. In cryptography, a party that has a keying relationship with a center or an entity that has a certificate from a certification authority.
Industry:Telecommunications
1 bir ortak anahtar şifreleme., o anahtar kullanıcı anahtar çiftinin yalnızca bu kullanıcı için bilinir. 2. bir şifreleme anahtarı oluşturulur ve bir tarafın gizli tutulacak. Not: Bir özel anahtar için aşağıdaki kullanılabilir: karşılık gelen ortak anahtar; hesaplamak için Buna karşılık gelen ortak anahtarı tarafından doğrulanmadı bir dijital imza oluþturmak için; Buna karşılık gelen ortak anahtar ile şifrelenmiş iletinin şifresini çözmek için; veya diğer bilgileri ile birlikte ortak bir parça hesaplamak için gizli bilgileri paylaştı. 3. şifreleme yöntemi şifreleyici ve decryptor gizli tutulmalıdır aynı anahtarı kullanır. 4. bir anahtar içinde asimetrik algoritma kullanılmış. Bu anahtarın sahibi, genellikle tek bir varlığa kısıtlıdır. 5. belgili tanımlık anahtar kullanılmış içinde tek bir varlık için bilinen bir asimetrik algoritma.
Industry:Telecommunications
1. In a communications system or network, the protection given to information to conceal it from unauthorized persons having access to the system or network at large. Synonym segregation. 2. In a communications system, protection given to unclassified information, such as radio transmissions of law enforcement personnel, that requires safeguarding from unauthorized persons. 3. In a communications system, the protection given to prevent unauthorized disclosure of the information in the system. Note 1: The required protection may be accomplished by various means, such as by communications security measures and by directives to operating personnel. Note 2: The limited protection given certain voice and data transmissions by commercial crypto equipment is sufficient to deter a casual listener, but cannot withstand a competent cryptanalytic attack. 4. The right of individuals to control or influence what information related to them may be collected and stored and by whom and to whom that information may be disclosed. NOTE - because this term relates to the right of individuals, ii cannot be very precise and its use should be avoided except as a motivation for requiring security.
Industry:Telecommunications
1. In a system , a shared boundary, i. E. , the boundary between two subsystems or two devices. 2. A shared boundary between two functional units, defined by specific attributes, such as functional characteristics, common physical interconnection characteristics, and signal characteristics. 3. A point of communication between two or more processes, persons, or other physical entities. 4. A point of interconnection between user terminal equipment and commercial communications facilities. 5. To interconnect two or more entities at a common point or shared boundary. 6. A common boundary between independent systems or modules where interactions take place. 7. The point of interconnection between two distinct but adjacent communications systems having different functions. The interface in the communication-satellite service is that point where communications terminal equipment of the terrestrial common carriers or other authorized entities interconnects with the terminal equipment of the communication-satellite earth station complex. The interface in the communication-satellite service shall be located at the earth station site, or if this is impracticable, as close thereto as possible. 8. The shared boundary between two functional units, defined by functional characteristics and other characteristics, as appropriate.
Industry:Telecommunications
1 elektronik (yoluyla) bilgisayarın doğrudan talebi olmadan başka bir bilgisayara veri göndermek için pazarlama,.. 2 ağ. verileri kullanılabilir olarak veri (aracılığıyla) istemci önceki talebi ile uyumlu bir istemciye sunucudan göndermek için.
Industry:Telecommunications
1. In data transmission, the sequence of contiguous bits delimited by, and including, beginning and ending flag sequences. Note 1: A frame usually consists of a specified number of bits between flag sequences and usually includes an address field, a control field, and a frame check sequence. Note 2: Frames usually consist of a representation of the original data to be transmitted, together with other bits which may be used for error detection or control. Additional bits may be used for routing, synchronization, or overhead information not directly associated with the original data. 2. In the multiplex structure of pulse-code modulation (PCM) systems, a set of consecutive time slots in which the position of each digit can be identified by reference to a frame-alignment signal. Note: The frame-alignment signal does not necessarily occur, in whole or in part, in each frame. 3. In a time-division multiplexing (TDM) system, a repetitive group of signals resulting from a single sampling of all channels, including any required system information, such as additional synchronizing signals. Note: "In-frame" is the condition that exists when there is a channel-to-channel and bit-to-bit correspondence, exclusive of transmission errors, between all inputs of a time-division multiplexer and the output of its associated demultiplexer. 4. In ISDN, a block of variable length, labeled at the Data Link Layer of the Open Systems Interconnection--Reference Model. 5. In video display, the set of all picture elements that represent one complete image. Note: In NTSC and other television standards used throughout the world, a frame consists of two interlaced fields, each of which has half the number of scanning lines, and consequently, half the number of pixels, of one frame. 6. In video display, one complete scanned image from a series of video images. Note: A video frame is usually composed of two interlaced fields. 7. In computer screen displays of HTML documents, a portion (usually rectangular) of the screen where one usually finds the same types of fields/information displayed, in the same manner as one usually finds the same or similar information displayed in the same segment of different copies of a printed form. 8. An HTML feature that allows multiple Web pages to be viewed simultaneously (by means of scrolling or re-sizing) through a browser window.
Industry:Telecommunications
1. In facsimile or display systems, such as television, a nonuniformity in the black area of the image, i. E. , document or picture, caused by the presence of noise in the received signal. 2. A signal or signal level that is supposed to represent a black area on the object, but has a noise content sufficient to cause the creation of noticeable white spots on the display surface or record medium.
Industry:Telecommunications
1. In facsimile or display systems, such as television, a nonuniformity in the white area of the image, i. E. ,, document or picture, caused by the presence of noise in the received signal. 2. A signal or signal level that is supposed to represent a white area on the object, but has a noise content sufficient to cause the creation of noticeable black spots on the display surface or record medium.
Industry:Telecommunications
1. kopya ya da televizyon, bir tarama alanı veya resim yüksekliği genişliği oranı. Not: Örneğin, klasik NTSC televizyon standart ve yeni yüksek tanımlı televizyon Standart 4:3 en-boy oranı 16:9 belirtir belirtir. 2. herhangi bir video veya Taranan görüntünün yüksekliği genişlik oranını görüntüler.
Industry:Telecommunications
