- Industrie: Oil & gas
- Number of terms: 9502
- Number of blossaries: 0
- Company Profile:
George King is a technology provider in the oil and gas industry specializing in new technology and problem oil well solutions.
Unproved reserves are based on geologic and/or engineering data similar to that used in estimates of proved reserves; but technical, contractual, economic, or regulatory uncertainties preclude such reserves being classified as proved. Unproved reserves may be further classified as probable reserves and possible reserves. Unproved reserves may be estimated assuming future economic conditions different from those prevailing at the time of the estimate. The effect of possible future improvements in economic conditions and technological developments can be expressed by allocating appropriate quantities of reserves to the probable and possible classifications.
Industry:Oil & gas
Unscrewing a tool or equipment. In pipe recovery, back-off of a joint precedes recovery of the upper section in a well. Common in plug and abandonment or sidetrack operations.
Industry:Oil & gas
Unusual data or measurement that is away from or out of the range of other data.
Industry:Oil & gas
Use a sonic depth measurement device to find the fluid level in a well.
Industry:Oil & gas
Use of a mineral acid (typically HCl or HCl/HF) or an organic acid (typically acetic or formic) to remove damage or stimulate the permeability of a formation.
Industry:Oil & gas
Used for treating cement contamination and calcium contamination in muds.
Industry:Oil & gas
Used to isolate the formation fracturing or injection effect from the friction effects.
Industry:Oil & gas
Uses a scintillation crystal and a photomultiplier tube to measure naturally occurring and artificially induced gamma-ray radiation. The gamma-ray radiation is a signature of the formations in a well – very useful in depth control. Used in open hole or pipe and also used to spot changes in radiation (NORM scale) and radioactive tracers.
Industry:Oil & gas
Uses eddy currents in a magnetic field to estimate casing thickness and anomalies.
Industry:Oil & gas
