толеранција

толеранција

1) The range between two limiting sizes as a means of specifying the degree of accuracy. 2) The amount a given bearing dimension may vary from specifications. 3) The difference between the upper and lower limits of a dimension or a specification. 4) A means of specifying the degree of accuracy.

0 0

Améliorer

Ajouter une image

Partie du discours : nom
Synonyme(s) :
Blossaire :
Secteur d’activité/Domaine : Machines-outils
Catégorie : Armoiries
Company: Timken
Produit :
Acronyme-Abréviation :

Suite

Ajouter à Mon Glossaire

Autres langues :

Suite

Commentaires

Voir les termes similaires

хабање

Machines-outils; Armoiries

Damage resulting from the removal of materials from surfaces in relative motion. Wear is generally described as: : Abrasive: Removal of materials from surfaces in relative motion ...

заштитни омот

Machines-outils; Armoiries

A metal cap that fits over the outer end of the hub to keep grease in and dirt out of the bearing assembly.

топлотно ширења

Machines-outils; Armoiries

The expansion caused by the increase in temperature. This may be linear or volumetric.

статична тачке

Machines-outils; Armoiries

The section of the helix seal lip incorporating the contact line.

штит

Machines-outils; Armoiries

A metal formed washer attached to the outer ring and set so it rides close to, but not contacting, the inner ring, to retain lubricant and prevent contamination.

оксидација

Machines-outils; Armoiries

This occurs when oxygen attacks petroleum fluids. The process is accelerated by heat, light, metal catalysts and the presence of water, acids, or solid contaminants. It leads to ...